ADDITIVE FOR CELLULOSE ACETATE MEMBRANE FROM COCONUT SAP IN DESALINATION APPLICATION
Article Sidebar
Published:
Jun 30, 2020
Keywords:
cellulose acetate coconut sap desalination
Main Article Content
Abstract
The cellulose acetate membrane based on coconut sap was successfully synthesized by phase inversion method. Membrane application on desalination has been done to know membrane performance. The additive can affect the membrane performance. This research was conducted to find out the effect of the additive. The additives are polyethylene glycol (PEG) and formamide. Membrane characterization studied including flux, rejection, tensile strength, and pore size. The result showed that cellulose acetate membrane with PEG has 7.08 L/(m2.h) of flux and 32.23% of rejection. While membrane with formamide has 7.08 L/(m2.h) of flux and 46% of rejection. The additive can increase the membrane performance. Formamide additive gives a better membrane characteristic than PEG.
Downloads
Download data is not yet available.
Article Details
How to Cite
Widyaningsih, S., Chasani, M., Zusfahair, Z., Anam, M. S. K., & Anisya, A. N. (2020). ADDITIVE FOR CELLULOSE ACETATE MEMBRANE FROM COCONUT SAP IN DESALINATION APPLICATION. Malaysian Journal of Science, 39(2), 41–50. https://doi.org/10.22452/mjs.vol39no2.3
Issue
Section
Original Articles
Transfer of Copyrights
- In the event of publication of the manuscript entitled [INSERT MANUSCRIPT TITLE AND REF NO.] in the Malaysian Journal of Science, I hereby transfer copyrights of the manuscript title, abstract and contents to the Malaysian Journal of Science and the Faculty of Science, University of Malaya (as the publisher) for the full legal term of copyright and any renewals thereof throughout the world in any format, and any media for communication.
Conditions of Publication
- I hereby state that this manuscript to be published is an original work, unpublished in any form prior and I have obtained the necessary permission for the reproduction (or am the owner) of any images, illustrations, tables, charts, figures, maps, photographs and other visual materials of whom the copyrights is owned by a third party.
- This manuscript contains no statements that are contradictory to the relevant local and international laws or that infringes on the rights of others.
- I agree to indemnify the Malaysian Journal of Science and the Faculty of Science, University of Malaya (as the publisher) in the event of any claims that arise in regards to the above conditions and assume full liability on the published manuscript.
Reviewer’s Responsibilities
- Reviewers must treat the manuscripts received for reviewing process as confidential. It must not be shown or discussed with others without the authorization from the editor of MJS.
- Reviewers assigned must not have conflicts of interest with respect to the original work, the authors of the article or the research funding.
- Reviewers should judge or evaluate the manuscripts objective as possible. The feedback from the reviewers should be express clearly with supporting arguments.
- If the assigned reviewer considers themselves not able to complete the review of the manuscript, they must communicate with the editor, so that the manuscript could be sent to another suitable reviewer.
Copyright: Rights of the Author(s)
- Effective 2007, it will become the policy of the Malaysian Journal of Science (published by the Faculty of Science, University of Malaya) to obtain copyrights of all manuscripts published. This is to facilitate:
(a) Protection against copyright infringement of the manuscript through copyright breaches or piracy.
(b) Timely handling of reproduction requests from authorized third parties that are addressed directly to the Faculty of Science, University of Malaya. - As the author, you may publish the fore-mentioned manuscript, whole or any part thereof, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
You may produce copies of your manuscript, whole or any part thereof, for teaching purposes or to be provided, on individual basis, to fellow researchers. - You may include the fore-mentioned manuscript, whole or any part thereof, electronically on a secure network at your affiliated institution, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
- You may include the fore-mentioned manuscript, whole or any part thereof, on the World Wide Web, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
- In the event that your manuscript, whole or any part thereof, has been requested to be reproduced, for any purpose or in any form approved by the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers), you will be informed. It is requested that any changes to your contact details (especially e-mail addresses) are made known.
Copyright: Role and responsibility of the Author(s)
- In the event of the manuscript to be published in the Malaysian Journal of Science contains materials copyrighted to others prior, it is the responsibility of current author(s) to obtain written permission from the copyright owner or owners.
- This written permission should be submitted with the proof-copy of the manuscript to be published in the Malaysian Journal of Science
References
Aprilia, N. A. S., Fauzi, Azmi, N., Najwan, N., & Amin, A. (2018). Performance of cellulose acetate membrane with different additives for palm oil mill effluent (POME) liquid waste treatment. IOP Conference Series: Materials Science and Engineering, 334(1). https://doi.org/10.1088/1757-899X/334/1/012024
Chen, G. J., & Lee, D. J. (2018). Synthesis of asymmetrical cellulose acetate/cellulose triacetate forward osmosis membrane: Optimization. Journal of the Taiwan Institute of Chemical Engineers, (xxxx). https://doi.org/10.1016/j.jtice.2018.10.031
Day, R. A., & Underwood, A. L. (1994). Analisa Kimia Kuantitatif. Erlangga.
Etemadi, H., Yegani, R., & Babaeipour, V. (2017). Performance evaluation and antifouling analyses of cellulose acetate/nanodiamond nanocomposite membranes in water treatment. Journal of Applied Polymer Science, 134(21), 1–14. https://doi.org/10.1002/app.44873
Ettouney, H., & Wilf, M. (2009). Conventional Thermal Process. Seawater Desalination: Conventional and Renewable Energy Processes. https://doi.org/10.1007/978-3-642-01150-4
Galiano, F., Briceño, K., Marino, T., Molino, A., Christensen, K. V., & Figoli, A. (2018). Advances in biopolymer-based membrane preparation and applications. Journal of Membrane Science, 564(May), 562–586. https://doi.org/10.1016/j.memsci.2018.07.059
Humplik, T., & Wang, E. (2017). Desalinating sea water: towards novel desalination membranes with enhanced performance. Membrane Technology, 2017(3), 10–11. https://doi.org/10.1016/S0958-2118(17)30058-7
Laghari, S. M., Isa, M. H., & Laghari, A. J. (2016). Delignification of palm fiber by microwave assisted chemical pretreatment for improving energy efficiency. Malaysian Journal of Science, 35(1), 8–14.
Mitrouli, S. T., Kostoglou, M., & Karabelas, A. J. (2016). Calcium carbonate scaling of desalination membranes: Assessment of scaling parameters from dead-end filtration experiments. Journal of Membrane Science, 510, 293–305. https://doi.org/10.1016/j.memsci.2016.02.061
Mulder. (1996). Basic Principles of Membrane Technology (first edit). Dordrecht: Kluwer Academic.
Mulyati, S., Aprilia, S., Safiah, Syawaliah, Armando, M. A., & Mawardi, H. (2018). The effect of poly ethylene glycol additive on the characteristics and performance of cellulose acetate ultrafiltration membrane for removal of Cr(III) from aqueous solution. IOP Conference Series: Materials Science and Engineering, 352(1). https://doi.org/10.1088/1757-899X/352/1/012051
Radiman, C. L., Widyaningsih, S., & Sugesty, S. (2008). New applications of kenaf (Hibiscus cannabinus L.) as microfiltration membranes. Journal of Membrane Science, 315(1–2), 141–146. https://doi.org/10.1016/j.memsci.2008.02.012
Radiman, Cynthia L, & Sarinastiti, A. (2012). Cellulosic Materials As Polymer Electrolyte. Jurnal Selulosa, 2(2), 46–52.
Rosnelly, C. M., Darmadi, & Sofyana. (2013). Effect of Dope Solution Temperature on Characteristic and Performance of Cellulose Diacetate Membrane Based on Cellulose of Sengon Wood ( Paraserianthes falcataria sp ). In Journal on Advanced Science Engineering Information Technology, 3(2), 15–18. https://doi.org/10.1016/j.biocon.2017.10.008
Rukmana, R., & Yuniarsih, Y. (2001). Membuat Kecap : Tempe Busuk, Nira, Air Kelapa (first edit). Yogyakarta: Kanisius.
Vaulina, E., Widyaningsih, S., Kartika, D., & Romdoni, M. P. (2018). The Effect of Cellulose Acetate Concentration from Coconut Nira on Ultrafiltration Membrane Characters. IOP Conference Series: Materials Science and Engineering, 349(1). https://doi.org/10.1088/1757-899X/349/1/012020
Widyaningsih, S., & Purwati, P. (2013). Pemanfaatan Membran Nata De Coco Sebagai Media Filtrasi Untuk Rekoveriminyak Jelantah. Molekul, 8(1), 20. https://doi.org/10.20884/1.jm.2013.8.1.122
Yap, P. S., Ibrahim, S., & Ang, K. B. (2013). TREATMENT OF RUBBER GLOVE WASTEWATER BY ULTRAFILTRATION. Malaysian Journal of Science, 32(1), 61–65.
Zafar, M., Ali, M., Maqsood, S., Jamil, T., Taqi, M., & Butt, Z. (2012). Effect of additives on the properties and performance of cellulose acetate derivative membranes in the separation of isopropanol / water mixtures. Desalination, 285, 359–365. https://doi.org/10.1016/j.desal.2011.10.027
Zularrisam, A. ., Ismail, A. ., & Salim, M. . (2007). Ultrafiltartion of Natural Organic Matter (NOM): Effect of NOM Characteristic on Membrane Rejection Mechanisms in Drinking Water Process. Malaysian Journal of Science, 26(1), 97–107.
Chen, G. J., & Lee, D. J. (2018). Synthesis of asymmetrical cellulose acetate/cellulose triacetate forward osmosis membrane: Optimization. Journal of the Taiwan Institute of Chemical Engineers, (xxxx). https://doi.org/10.1016/j.jtice.2018.10.031
Day, R. A., & Underwood, A. L. (1994). Analisa Kimia Kuantitatif. Erlangga.
Etemadi, H., Yegani, R., & Babaeipour, V. (2017). Performance evaluation and antifouling analyses of cellulose acetate/nanodiamond nanocomposite membranes in water treatment. Journal of Applied Polymer Science, 134(21), 1–14. https://doi.org/10.1002/app.44873
Ettouney, H., & Wilf, M. (2009). Conventional Thermal Process. Seawater Desalination: Conventional and Renewable Energy Processes. https://doi.org/10.1007/978-3-642-01150-4
Galiano, F., Briceño, K., Marino, T., Molino, A., Christensen, K. V., & Figoli, A. (2018). Advances in biopolymer-based membrane preparation and applications. Journal of Membrane Science, 564(May), 562–586. https://doi.org/10.1016/j.memsci.2018.07.059
Humplik, T., & Wang, E. (2017). Desalinating sea water: towards novel desalination membranes with enhanced performance. Membrane Technology, 2017(3), 10–11. https://doi.org/10.1016/S0958-2118(17)30058-7
Laghari, S. M., Isa, M. H., & Laghari, A. J. (2016). Delignification of palm fiber by microwave assisted chemical pretreatment for improving energy efficiency. Malaysian Journal of Science, 35(1), 8–14.
Mitrouli, S. T., Kostoglou, M., & Karabelas, A. J. (2016). Calcium carbonate scaling of desalination membranes: Assessment of scaling parameters from dead-end filtration experiments. Journal of Membrane Science, 510, 293–305. https://doi.org/10.1016/j.memsci.2016.02.061
Mulder. (1996). Basic Principles of Membrane Technology (first edit). Dordrecht: Kluwer Academic.
Mulyati, S., Aprilia, S., Safiah, Syawaliah, Armando, M. A., & Mawardi, H. (2018). The effect of poly ethylene glycol additive on the characteristics and performance of cellulose acetate ultrafiltration membrane for removal of Cr(III) from aqueous solution. IOP Conference Series: Materials Science and Engineering, 352(1). https://doi.org/10.1088/1757-899X/352/1/012051
Radiman, C. L., Widyaningsih, S., & Sugesty, S. (2008). New applications of kenaf (Hibiscus cannabinus L.) as microfiltration membranes. Journal of Membrane Science, 315(1–2), 141–146. https://doi.org/10.1016/j.memsci.2008.02.012
Radiman, Cynthia L, & Sarinastiti, A. (2012). Cellulosic Materials As Polymer Electrolyte. Jurnal Selulosa, 2(2), 46–52.
Rosnelly, C. M., Darmadi, & Sofyana. (2013). Effect of Dope Solution Temperature on Characteristic and Performance of Cellulose Diacetate Membrane Based on Cellulose of Sengon Wood ( Paraserianthes falcataria sp ). In Journal on Advanced Science Engineering Information Technology, 3(2), 15–18. https://doi.org/10.1016/j.biocon.2017.10.008
Rukmana, R., & Yuniarsih, Y. (2001). Membuat Kecap : Tempe Busuk, Nira, Air Kelapa (first edit). Yogyakarta: Kanisius.
Vaulina, E., Widyaningsih, S., Kartika, D., & Romdoni, M. P. (2018). The Effect of Cellulose Acetate Concentration from Coconut Nira on Ultrafiltration Membrane Characters. IOP Conference Series: Materials Science and Engineering, 349(1). https://doi.org/10.1088/1757-899X/349/1/012020
Widyaningsih, S., & Purwati, P. (2013). Pemanfaatan Membran Nata De Coco Sebagai Media Filtrasi Untuk Rekoveriminyak Jelantah. Molekul, 8(1), 20. https://doi.org/10.20884/1.jm.2013.8.1.122
Yap, P. S., Ibrahim, S., & Ang, K. B. (2013). TREATMENT OF RUBBER GLOVE WASTEWATER BY ULTRAFILTRATION. Malaysian Journal of Science, 32(1), 61–65.
Zafar, M., Ali, M., Maqsood, S., Jamil, T., Taqi, M., & Butt, Z. (2012). Effect of additives on the properties and performance of cellulose acetate derivative membranes in the separation of isopropanol / water mixtures. Desalination, 285, 359–365. https://doi.org/10.1016/j.desal.2011.10.027
Zularrisam, A. ., Ismail, A. ., & Salim, M. . (2007). Ultrafiltartion of Natural Organic Matter (NOM): Effect of NOM Characteristic on Membrane Rejection Mechanisms in Drinking Water Process. Malaysian Journal of Science, 26(1), 97–107.